Product ID:MA-428 ADWELD EPOXY,PART H (HARDENER)
MSDS Date:09/19/1990
FSC:8040
NIIN:00N011749
MSDS Number: BJMSD

Emergency Phone: 800-647-2253

Info Phone: 800-647-2253

Cage: 80991

Cage: 80991

NONHAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS AND SYMPTOMS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN/INGESTION/INHALATION:UNKNOWN.
Medical Cond Aggravated by Exposure:N/K

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES UNTIL
RELIEVED.CONSULT A PHYSICIAN.SKIN:N/K .INGESTION:CALL MD
IMMEDIATELY .INHALATION:REMOVE TO FRESH AIR.NOTES TO PHYSICIAN:ANY
TREATME NT THAT MIGHT BE REQUIRED FOR OVEREXPOSURE SHOULD BE
DIRECTED AT THE CONTROL OF SYMPTOMS AND THE CLINICAL CONDITIONS.

Lower Limits:N/K
Upper Limits:N/K
Extinguishing Media:NONE SHOULD BE NEEDED.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SELF-CONTAINED
BREATHING APPARATUS AND FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION
PRODUCTS:BURNING,INCLUDING WHEN HEATED BY WELDING OR CUTTING,WILL
PRODUCE SMOKE,CARBON MONOXIDE AND CARBON DIOXIDE.

Spill Release Procedures:CONFINE IN SMALL AREA;USE ABSORBENT TO CLEAN
UP.PLACE IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:N/K

Handling and Storage Precautions:NONE LIKELY TO BE NEEDED.
Other Precautions:NONE LIKELY TO BE NEEDED.

Respiratory Protection:NOT LIKELY TO BE NEEDED.
Ventilation:NATURAL VENTILATION SHOULD BE ADEQUATE UNDER NORMAL
CONDITIONS.
Protective Gloves:NOT LIKELY TO BE NEEDED.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NOT LIKELY TO BE NEEDED.
Work Hygienic Practices:N/K
Supplemental Safety and Health
ROUTES OF ENTRY:INHALATION/SKIN/INGESTION .

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:N/K
Spec Gravity:1.0 (WATER=1)
Solubility in Water:N/K
Appearance and Odor:N/K
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE KNOWN
Hazardous Decomposition Products:BURNING,INCLUDING WHEN HEATED BY
WELDING OR CUTTING,WILL PRODUCE SMOKE,CARBON MONOXIDE AND CARBON
DIOXIDE.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .AS PRODUCED,THIS PRODUCT IS
NOT A WASTE.IF DISCARDED AS IS,IT IS NOT CLASSIFIED AS A HAZARDOUS
WASTE UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.